The following steps describe the process of taking a capture of a specific project, such as a tower or a floor, using the manual 360-photo capture mode.
Stepwise Description:
Tap into the project of your interest that you wish to capture. This takes you to the project sections screen showing different levels.
Tap into the corresponding section you wish to capture for. This will load up the project design view. You can change the view type by tapping on Types at the bottom toolbar.
Tap on the shutter icon at the bottom right of the screen to open the capture type options. Select 360 Image type from here.
Note: If your 360 camera is not connected to your phone, the app will prompt you to connect the camera at this point. If you have trouble connecting the camera, please refer to this article.A corresponding section floor plan loads up. The next step is to select the location from which and the direction in which you want to take the photo.
Tap on Capture to initiate 360 camera capture. The app will show the capture in progress and alert you once the capture is complete. Choose to Save or Discard it.
The data upload part has 2 steps:
Step 1: Sync the image from the camera to your phone
Step 2: After completion of data sync from the camera to the mobile, you can press on the upload icon to initiate the data upload to the cloud.
We hope this article has been helpful. If you have any questions please reach out to [email protected]